- users-list - monetdb.org

[MonetDB-users] MonetDB shows error after graceful stop
by Venks 25 May '07

25 May '07

Hi, I am using the following commands to START and STOP the MonetDB database. monetdb --start --dbname=test --dbinit='include sql;' monetbd --stop After I STOP the monetdb server I am getting the following messages in my console. Sometimes these messages repeat few times. ========================================================= /root/MonetDB070524/bin/mguardian: line 131: [: /dev/mapper/VolGroup00-LogVol00 43: integer expression expected /root/MonetDB070524/bin/mguardian: line 195: mserver5: command not found ========================================================== What are these messages? Do they represent an error in my set up? Or is this a some bug in MonetDB? Please look into it. Thanks, - Venks

3 2

[MonetDB-users] monetdb-install.sh not working
by Venks 25 May '07

25 May '07

Folks, I tried to executed the all-in-one script "monetdb-install.sh" and it's not working. I installed it last week few times without any error. Please look into this issue. Thanks, PS: Below is the excerpt from the log file. ======================================================= Connecting to www.ins.cwi.nl[192.16.196.21]:80... connected. HTTP request sent, awaiting response... Please refer to the full log at /var/tmp/MonetDB-1179870979/log If you believe this is an error in the script or the software, Tue May 22 17:56:20 EDT 2007 The following tools might be relevant to debug your problem: : 1.12 $ 403 Forbidden 17:56:20 ERROR 403: Forbidden. fetching http://www.ins.cwi.nl/~fabian/monetdb/tars/latest/current/MonetDB.tar.gz failed! file a bug and attach the logfile. autoconf (GNU Autoconf) 2.59 Written by David J. MacKenzie and Akim Demaille. =======================================================

6 10

Re: [MonetDB-users] Unable to connect to MonetDB
by Colin Foss 25 May '07

25 May '07

Venks, That is a good question and I didn't send the resolution to the general list. The strange behavior was that local connections were ok and remote connections would block all subsequent connections (local or remote) until I killed the remote MapiClient. I think there is something wrong with the "release" version when compiled from the script. After I used --nightly=stable or --nightly=current I was able to connect. I had mapi_open=true with all three versions. I was going to recompile with --nightly=current today, now that all is well again with www.ins.cwi.nl and I'll let you know my results. ~~>Colin --- Venks <venkatesh.mantha(a)gmail.com> wrote: > Colin, > > Was your issue regarding connecting from other > clients > (mapi_open=true) resolved? > > I installed the latest build this morning and now I > am unable to > connect from other clients. > > Thanks, > > - Venks >

1 0

[MonetDB-users] MonetDb-XQuery problem
by Maarten Clements 25 May '07

25 May '07

Using the following XQuery in MonetDb (WinXP) crashes on large documents (when C1 and C2 are small it works ok): > <col> { > for $b in doc("C1.xml")/collection/doc > for $top in doc("C2.xml")/collection/doc > where ($b/year > 1950) and ($b/title = $top/title) > return > <movie> > {$b/year} > </movie> > } </col> If I remove one of the two conditions it works perfectly, e.g.: > <col> { > for $b in doc("C1.xml")/collection/doc > for $top in doc("C2.xml")/collection/doc > where ($b/title = $top/title) > return > <movie> > {$b/year} > </movie> > } </col> Can anyone explain this problem? ______________________________ Maarten Clements

3 5

[MonetDB-users] copy into with primary key errors
by Colin Foss 24 May '07

24 May '07

I've been trying to bulk load a large set of data into a table with a compound primary key. Every time the copy into fails on the second file with an error about an "invalid input type". Even if I comment out the suspect file, the third file with have the same error. If I repeat the load and comment out the first file, then the third file will have the "invalid input type" error. Has anyone been able to use COPY INTO with a compound primary key and multiple files?

1 1

[MonetDB-users] Cannot connect to MonetDB via ODBC from PowerBuilder
by Franco Guidoli 24 May '07

24 May '07

Hi all: I'm trying to connect to MonetDB via ODBC from PowerBuilder, but during connection it gets into a "loop" (that's what I think after viewing the ODBC driver log which I'm sending now). Thanks in advance. Franco http://www.nabble.com/file/p10774553/odbcdebug.log odbcdebug.log -- View this message in context: http://www.nabble.com/Cannot-connect-to-MonetDB-via-ODBC-from-PowerBuilder-… Sent from the monetdb-users mailing list archive at Nabble.com.

2 1

[MonetDB-users] latest build startup error
by Colin Foss 23 May '07

23 May '07

After building with "monetdb-install.sh --enable-sql", The default .mserver5.dbinit contains: include sql;sql.start(); the "sql.start();" command triggers an error found in mserver5.log in the dbfarm. == mserver5.log: START 2007-05-17 08:13:02 #include sql; sql.start(); # function user.main():void; # 0 (main:void) #command startQuery(s:str):void # 1 (_1:str) #address SQLstartQuery # 2 (_2:str) #comment "Initialize tracing query performance"; # 3 (_3:str) #command exitQuery(s:str):void # 4 (_4:str) #address SQLexitQuery # 5 (_5:str) #comment "Finalize tracing query performance"; # 6 (_6:str) #command dec_round( v:sht, r:dbl ) :sht # 7 (_7:str) #address sht_dbl_dec_round_wrap # 8 (_8:str) #comment "round off the value v to nearests multiple of r"; # 9 (_9:str) #command dec_round( v:sht, r:int ) :sht # 10 (_10:str) #address sht_int_dec_round_wrap # 11 (_11:str) #comment "round off the value v to nearests multiple of r"; # 12 (_9:str) #command dec_round( v:int, r:dbl ) :int # 13 (_12:str) #address int_dbl_dec_round_wrap # 14 (_13:str) #comment "round off the value v to nearests multiple of r"; # 15 (_9:str) #command dec_round( v:int, r:int ) :int # 16 (_14:str) #address int_int_dec_round_wrap # 17 (_15:str) #comment "round off the value v to nearests multiple of r"; # 18 (_9:str) #command dec_round( v:lng, r:dbl ) :lng # 19 (_16:str) #address lng_dbl_dec_round_wrap # 20 (_17:str) #comment "round off the value v to nearests multiple of r"; # 21 (_9:str) #command dec_round( v:lng, r:int ) :lng # 22 (_18:str) #address lng_int_dec_round_wrap # 23 (_19:str) #comment "round off the value v to nearests multiple of r"; # 24 (_9:str) #command dec_round( v:flt, r:int ) :flt # 25 (_20:str) #address flt_int_dec_round_wrap # 26 (_21:str) #comment "round off the value v to nearests multiple of r"; # 27 (_9:str) #command dec_round( v:dbl, r:int ) :dbl # 28 (_22:str) #address dbl_int_dec_round_wrap # 29 (_23:str) #comment "round off the value v to nearests multiple of r"; # 30 (_9:str) #address CALCstr2sht # 31 (_24:str) #command calc.str( v:sht ) :str # 32 (_25:str) #address CALCsht2str # 33 (_26:str) #comment "Cast sht to str"; # 34 (_27:str) #address CALCstr2int # 35 (_28:str) #command calc.str( v:int ) :str # 36 (_29:str) #address CALCint2str # 37 (_30:str) #comment "Cast int to str"; # 38 (_31:str) #address CALCstr2lng # 39 (_32:str) #command calc.str( v:lng ) :str # 40 (_33:str) #address CALClng2str # 41 (_34:str) #comment "Cast lng to str"; # 42 (_35:str) #command calc.str( v:any_1, digits:int ) :str # 43 (_36:str) #address CALCflt2sht # 44 (_37:str) #address CALCflt2int # 45 (_38:str) #address CALCflt2lng # 46 (_39:str) #address CALCdbl2sht # 47 (_40:str) #address CALCdbl2int # 48 (_41:str) #address CALCdbl2lng # 49 (_42:str) #address CALCsht2sht # 50 (_43:str) #address CALCint2sht # 51 (_44:str) #address CALClng2sht # 52 (_45:str) #address CALCsht2int # 53 (_46:str) #address CALCint2int # 54 (_47:str) #address CALClng2int # 55 (_48:str) #address CALCsht2lng # 56 (_49:str) #address CALCint2lng # 57 (_50:str) #address CALClng2lng # 58 (_51:str) #address CALCsht2flt # 59 (_52:str) #address CALCint2flt # 60 (_53:str) #address CALClng2flt # 61 (_54:str) #address CALCsht2dbl # 62 (_55:str) #address CALCint2dbl # 63 (_56:str) #address CALClng2dbl # 64 (_57:str) sql.prelude(); # 65 SQLprelude (_58:void) sql.start(); # 66 SQLsession (_59:void) end main; # 67 !syntax error, unexpected IDENT in: "include" I'm not sure if this is a bug in the monetdb script or mserver5 itself.

2 2

[MonetDB-users] website community links
by Colin Foss 22 May '07

22 May '07

I'd like to make a suggestion for the community webpage of http://monetdb.cwi.nl, please add a link to the sourceforge tracker (http://sourceforge.net/tracker/?group_id=56967)

2 1

[MonetDB-users] Creative Suite 3 Design ready to download
by Colby Sizemore 22 May '07

22 May '07

By treesor might see as the masonrySeems reflected in the infinite of the lamps.I might have happily lived some other childhood.and the numbed yards will go back undercover.From point to point of meaningopen? closed?Wind, sleet. The branches sway,But what I am looking at is hardened snow,they sit with their wives all day in the sun,At San Biagio, in the most intense roomGray the cloud-like oaksA frame of glided twilightIGiven by nature will soak into it.Again awaken from your being gone to findAs if your human shape were what the stormShe stretches a hand toward the toothy sleeperDim, and die tonight?Your gloved hands covering your lips' good-byeCoextensive with everything? How could they know?The flakes which have stolen onto the flagstones

1 0

[MonetDB-users] monetdb roadmap
by Colin Foss 21 May '07

21 May '07

Anyone have insight into when 2.18 will be released? http://monetdb.cwi.nl/projects/monetdb/Development/Roadmap/index.html

1 0